Thompson's Quick Drying Drive Seal revives old tarmac fast. It protects drives from oil stains and is ready for vehicle traffic after just 4 hours.

Before you start, give the tarmac a scrub with a stiff bristle brush to remove any dust, dirt or moss. Fill any holes with fresh concrete or cold cure tarmac, if needed. Make sure any cleaners are rinsed off the tarmac and its dry before you start to apply Quick Drying Drive Seal.

When using on cold and damp days drying and re-coat times will take longer. For best results, use on a dry day above 10C. Give the tin a really good stir before and during use and use a long pile roller and tray for this job. Pour the paint into the roller tray and fully load your roller and keep on stirring the paint during use. Paint from the furthest point so you can get back into your house and don't paint yourself into a corner! Wait 4 hours before putting on a second coat. Clean your equipment with warm water and detergent.